ZKG serial vacuum drying oven takes the dry material in a vacuum condition for heated drying. Utilizing of vacuum pump for air exhaust and wet exhaust will speed up the drying rate. If using the condenser, the solvent in materials can be recycled through the condenser.
The boiling point of material solution shall be depressed under vacuum condition, making the driving force of heat transfer for the evaporator increase, therefore, the heat transfer area of the evaporator can be saved for certain heat transmission.
Disinfection treatment could be done before drying process; none of the impurity shall be mixed in during the process of drying, which will be in line with the GMP requirements. It is a kind of static vacuum dryer; so the shape of the dry material will not be damaged.

specification	φ×L	φ×L	φ×L	L×W×H
inner size of tank mmmm	600×976	1000×1527	1400×2054	1500×1400×1220
external dimension of tank mmmm	1135×810×1020	1693×1190×1500	2386×1675×1920	1513×1924×2060
drying rack layer	4	6	8	8
interlayer distance mmmm	81	102	102	122
drying disk size mmmm	310×600×45	460×640×45	460×640×45	460×640×45
drying disk quantity	4	12	32	32
Pressure in the drying tube MPaMPa	≤0.784	≤0.784	≤0.784	≤0.784
inner tank temperature℃	≤150	≤150	≤150	≤150
inner tank no-load vacuum degree torr	≤30
vaporization rate of water under vacuum degree of 30 torr and heating temperature of 110℃時，水的汽化率（kg/m2.h）	7.2
vacuum pump model and power using the condenser (kw)	2X-15A 2kw	2X-30A 3kw	2X-70A 7.5kw	2X-70A 7.5kw